The mold is actually closely linked with our lives, more than 90% of the items in our lives are made through the mold and 95% of goods during of them are made through the high-temperature mold casting, the temperature is generally required to reach more than 300 ° C. Mold is including injection molding, blow molding, extrusion, casting or forging molding, smelting, stamping, stretching etc.
We can not use the traditional insulation materials insulation due to the special shape of the mold, the mold under high temperature heat loss is great, it is not only directly increase the cost of production, and caused a large number of production lines frequently cut-off resulting in greater economic losses due to frequent replacement of the mold.The mold temperature insulation coating successfully used to solve the problem of the mold industry, the loss of a lot of resources. The only domestic production mold high temperature insulation coatings manufacturers, the Sanait Chemical Co., Ltd., the SA-1 high temperature insulation coating, thermal conductivity coefficient 0.03w/mk temperature of 1800 ° C can effectively inhibit various conduction heat and radiant heat, heat insulation up to 90% inhibition efficiency compartment live mold more than 80% of the heat, resulting in the internal temperature of the mold is very good, the outer surface temperature is not hot. Coated with 8mm thick coating at 1100 ° C. The surface of the mold, mold surface temperature can be reduced from 1100 ° C to 100 ° C or less. Sanait's mold high temperature thermal insulation coatings chloride ion content is zero, but also to prevent the wet air or process chloride, sulfide into contact with the metal surface, play a good mold metal corrosion effect, it will not lead to weld metal welding embrittlement, SA-1 mold temperature insulation coating high dielectric constant, good high temperature insulation.
With using the high temperature insulation coating, the energy-saving heat loss can be more than 80% the mold metal corrosion rate decreased to 60%, the personnel security increased by 100%, more than 30% increase in the efficiency of enterprises, industrial production safety factor doubling.
Mold is an important part of the industrial production, mold insulation improve industrial production safety factor to prevent personal injury and property damage accidents in production, eliminate or control dangerous and harmful factors, to protect personal safety and health, equipment and facilities from damage of great significance.