-
Explain Cold-box Molding And Mold Making Use Of Details
Cold-box mold with core shooters also called cold box shoot core machine, also known as cold- dryer. Mold does not require heating can be the product curing, so people call it cold-box mold. Mold is a way to cure by heating the sand core product, are now using electric heating method, previously useful for gas and other fire burned directly outside , because not control the temperature, the lower the success rate of the product, now rarely used this method.
2015/10/13 huqiong 119
-
Correctly Distinguish 718 And H13 Tool Steel And Die Steel
Mould steel is used to make die , die forging mould , such as mould steel. Mould is the machinery , radio instrumentation , electrical, electronics and other industrial sectors in the manufacturing part of the main processing tools.
2015/08/27 huqiong 122
-
Treatment For Iron Mould Defects
By using stock glass pipe, glass plate as a building material, maximize cost savings. Glass pipe to ensure mould inner diameter precision by using a micrometer and calipers select the most to meet the requirements. Through the glass plate made of die outer diameter after its precise trimming polished, ensure the accuracy of the outer diameter of the mold. Steel surface of the glass in advance with the paper mill and polishing machine for grinding and polishing, to ensure of the bottom surface of the mould.
2015/08/10 huqiong 115
-
.jpg)
Digital Mould Technology Applying In Automobile Mould
In recent years, the rapid development of digital mould technology, is an effective way to solve many problems in the automotive mould development. The so-called digital die technology is computer technology or computer-assisted technology (CAX) used in mould design and manufacturing process.
2015/07/27 huqiong 125
-
![How To Avoid The Casting Surface Impression]()
How To Avoid The Casting Surface Impression
Due to the casting surface of the mold cavity bump and push rod, inserts, blocks and other parts splicing activity left protruding and recessed marks. Alias: putter prints, inserts or activities splicing block prints.
2015/07/14 huqiong 134
-
![How To Reduce Mould Defects In The Manufacturing Process (Point 1-3)]()
How To Reduce Mould Defects In The Manufacturing Process (Point 1-3)
Some marks are always found on the mould, it is caused during the process of manufacturing the mould or technical flaws. It is very important to reduce the mould defects in the manufacturing process.
2015/06/30 huqiong 117
-
![Five Cooling Methods Let Die Steels Getting Better]()
Five Cooling Methods Let Die Steels Getting Better
In order to improve the mould steel hardness, we can upgrade by hardening heat treatment process. In order to better performance after handling tool steel, we need to be cool at the hardening process.
2015/06/23 huqiong 93
