-
Taking Notice Of Design Aluminum And Aagnesium Alloy Castings Construction
Since the melting point of aluminum and magnesium alloys low, you can use a variety of methods for producing cast aluminum and magnesium alloy castings. Therefore, in the design of their structures, the first of which should be considered in the foundry casting casting method in order to consider the appropriate structure manufacture ability.
2015/07/21 huqiong 120
-
How To Reduce Mould Defects In The Manufacturing Process (Point 4-7)
Electrolytic grinding, improve mold manufacturing precision and surface quality . electrolytic grinding wheel scraping the oxide film: instead of grinding metal, thus small grinding force, grinding heat is small, does not produce grinding burrs, cracks, burns and other phenomena, the general surface roughness can be better than Ra0 .16μm; addition , wheel wear is set small, such as grinding carbide, silicon carbide wear large grinding wheel of about 400% to 600% by weight of the carbide off, electrolytic grinding, the grinding wheel wear only the amount of carbide material removal amount of 50% to 100 %. Reasonable choice of grinding parameters, the use of radial feed grinding method even smaller amount of fine grinding. As appropriate to reduce the radial feed rate and wheel speed , increasing the axial feed rate, so that the grinding wheel and the workpiece contact area is reduced , cooling conditions have been improved in order to effectively control the increase of surface temperatures.
2015/07/07 huqiong 102