-
What Should Be Made Before The Mould Assembly
Injection molding is a process of assembly process planning document mold assembly process and method of operation, but also to guide the mold assembly work of the technical documents, assembly is based on the production plan and technical preparations. Therefore, before assembly workers must carefully read the assembly process planning, knowledge and understanding of the whole process to be assembled mold.
2015/11/17 137
-
Detection Automotive Stamping Dies
Flexible gauze grinding: with a clean gauze to cover the outer surface clean. Flexible sand net close to stamping surface longitudinally polish to the entire surface, any pitting, indentation will easily be found.
2015/11/10 121
-
The modular design of the mold
Shorten the design cycle and improve design quality is the key to shorten the development cycle of the entire mold. Modular design is the use of product components in the structure and function of similarity, and to achieve product standardization.
2015/10/20 huqiong 108
-
Explain Cold-box Molding And Mold Making Use Of Details
Cold-box mold with core shooters also called cold box shoot core machine, also known as cold- dryer. Mold does not require heating can be the product curing, so people call it cold-box mold. Mold is a way to cure by heating the sand core product, are now using electric heating method, previously useful for gas and other fire burned directly outside , because not control the temperature, the lower the success rate of the product, now rarely used this method.
2015/10/13 huqiong 119
-
![The Application Of Prototype Mold With Epoxy Resin]()
The Application Of Prototype Mold With Epoxy Resin
Epoxy resin/ nano silica filledacrylate, the heat distortion temperature (HDT) of up to 260 DEG C, which provides lateral wall of excellent quality. It has a higher resolution.DSMSomos global technology services and Application compared to other rapid prototyping material and machining process. DevelopmentManager Brian Bauman said, PET bottle prototype mold made of Nano Toolcan produce 500-1,000 PET bottles.
2015/10/07 huqiong 151
-
![Hainan Is Expected To Produce 100% Degradable Plastics]()
Hainan Is Expected To Produce 100% Degradable Plastics
By adding an environmentally friendly enzyme masterbatch in conventional polyethylene products, it can reach 100% plastic degradation effects in the natural environment. Hainan is expected to produce up to 100% of this global unique degradable plastic.
2015/09/22 huqiong 97
-
![Benefits For Stack Hot Runner Mold]()
Benefits For Stack Hot Runner Mold
Compared with the conventional single injection mold, hot runner molds can use laminated plastic melt evenly distributed among two separate sub-surface, so that the production of injection molding machine more than doubled.
2015/09/15 huqiong 114
-
![Hot Runner Technology Ventilation Precautions]()
Hot Runner Technology Ventilation Precautions
Hot runner technology in the filling and flow simulation, as well as mould and hot runner manufacturing and production experts, plastics processing processor will develop a set of interior design solutions for campers skylights production. Injection moulding stiffness and thermal deformation is a list of the most important of which needs two features.
2015/09/08 huqiong 91
-
![Three Points Must Be Pay Attention During Producing The Plastic Mould]()
Three Points Must Be Pay Attention During Producing The Plastic Mould
Plastic mould in the industrial production and processing are used more and more widespread. It is also increasingly play the role of the greater production requirements. Therefore, the plastic mold in the production process need to pay attention to in order to improve production efficiency.
2015/09/01 huqiong 96
-
![New Die - casting Mould Steel Can Improve Performance]()
New Die - casting Mould Steel Can Improve Performance
Most die-casting mould design complexity, high cost, so it requires quite a long mould life. The cost of materials and heat treatment in the production costs of the entire casting moulds accounts for only 10-15%, but the overall life of the mould has played a decisive impact.
2015/08/18 huqiong 137
