-
Plastic Injection Mould Industry To Replace The Equipment Makes The Contribution For The Environment
In Chinese, the environmental protection, recycling waste plastic recycling processing industry, because of the long-termextensive disorderly operation, toxic and hazardous waste plastics, along with a large number of domestic waste, native hybrid processing recovery, it has brought a huge air pollution to the environment, such as visibility 200 meters in the eleven period range. Waste input,cleaning processing granulation, recycled products, from the initial thrown,to re used by people, waste plastics repeated again and again the samsara.
2015/12/03 146
-
Estimate The Reliability Of The Bronzes From The Mould
Ancient piece of fan casting bronze, good surface finish, clearly discernible decoration even, there is little holes on the surface, less copper liquid perfusion to the situation and the shrinkage hole. Pseudo device lost wax and foundry casting, often appear some sand holes on the surface, some even produce shrinkage defects. If you don't know these, likely assume trachoma and shrinkage are characteristics of the old cast.
2015/11/24 130
-
Detection Automotive Stamping Dies
Flexible gauze grinding: with a clean gauze to cover the outer surface clean. Flexible sand net close to stamping surface longitudinally polish to the entire surface, any pitting, indentation will easily be found.
2015/11/10 121
-
Effect Of Heat Treatment Mold During The Heating Process
Anyone wishing produced molds can be used longer, save unnecessary expenses, while the application process can be Practice makes perfect, improve the quality of mold, extending the life of the heat treatment will be carried out, it will be in the process heating What impact?
2015/11/05 124
-
![The modular design of the mold]()
The modular design of the mold
Shorten the design cycle and improve design quality is the key to shorten the development cycle of the entire mold. Modular design is the use of product components in the structure and function of similarity, and to achieve product standardization.
2015/10/20 huqiong 108
-
![Explain Cold-box Molding And Mold Making Use Of Details]()
Explain Cold-box Molding And Mold Making Use Of Details
Cold-box mold with core shooters also called cold box shoot core machine, also known as cold- dryer. Mold does not require heating can be the product curing, so people call it cold-box mold. Mold is a way to cure by heating the sand core product, are now using electric heating method, previously useful for gas and other fire burned directly outside , because not control the temperature, the lower the success rate of the product, now rarely used this method.
2015/10/13 huqiong 119
-
![The Application Of Prototype Mold With Epoxy Resin]()
The Application Of Prototype Mold With Epoxy Resin
Epoxy resin/ nano silica filledacrylate, the heat distortion temperature (HDT) of up to 260 DEG C, which provides lateral wall of excellent quality. It has a higher resolution.DSMSomos global technology services and Application compared to other rapid prototyping material and machining process. DevelopmentManager Brian Bauman said, PET bottle prototype mold made of Nano Toolcan produce 500-1,000 PET bottles.
2015/10/07 huqiong 151
-
![Hainan Is Expected To Produce 100% Degradable Plastics]()
Hainan Is Expected To Produce 100% Degradable Plastics
By adding an environmentally friendly enzyme masterbatch in conventional polyethylene products, it can reach 100% plastic degradation effects in the natural environment. Hainan is expected to produce up to 100% of this global unique degradable plastic.
2015/09/22 huqiong 97
-
![Benefits For Stack Hot Runner Mold]()
Benefits For Stack Hot Runner Mold
Compared with the conventional single injection mold, hot runner molds can use laminated plastic melt evenly distributed among two separate sub-surface, so that the production of injection molding machine more than doubled.
2015/09/15 huqiong 114
-
![Hot Runner Technology Ventilation Precautions]()
Hot Runner Technology Ventilation Precautions
Hot runner technology in the filling and flow simulation, as well as mould and hot runner manufacturing and production experts, plastics processing processor will develop a set of interior design solutions for campers skylights production. Injection moulding stiffness and thermal deformation is a list of the most important of which needs two features.
2015/09/08 huqiong 91
